How to Improve the Efficient Operation of the Slurry Pump?

 As a Slurry Pump Manufacturers, share with you.

To ensure the efficient operation of the slurry pump, daily maintenance is essential. When the slurry pump is working, it needs to be placed on land, the suction pipe is placed in the water, and the pump needs to be started. The submerged slurry pump is limited by the structure, the motor slurry pump needs to be placed above the water surface when working, and the pump must be placed in the water, so it must be fixed, otherwise, the motor will fall into the water and the motor will be scrapped.

SP Pump

1. The pump has high operating efficiency and low loss;

2. The service life of the flow parts of the pump is relatively long, saving production costs;

3. The entire industrial and mining system runs stably, and the operation of the pump will not affect the work of the entire industrial and mining system.

What problems should be paid attention to in the maintenance of the slurry pump, one of course is the wire of the power supply. Check for aging, broken skin and leakage of the power cord. If you find these conditions, see if you can wrap it. Remember if it is in water Don’t wrap the wires, replace the power cord immediately,

In addition, it is necessary to periodically check whether the slurry pump impeller has mud jamming the water outlet, and whether the operation is good or not.

If there is some noise, it proves that the slurry pump bearing has been damaged. The next problem is the damage of the coil.

Sometimes the slurry pump can’t supply water. It is necessary to check whether it needs water diversion and whether the slurry pump is reversed. If this is the case, change the method of capacitor connection, or it is in the gap of the impeller. There are sundries that make it impossible to supply water.

Our company also has SP Pump on sale, welcome to contact us.