What is the Application of Slurry Pump Type Selection in Vari

 As a Slurry Pump Manufacturers, share with you.

Slurry pump model selection The pump is single-stage, single-suction, and axial suction. According to the structure of the pump casing and the direction of the pump shaft, it is divided into the following three structures:

1. Horizontal double-shell pump with inner shell and outer shell-suitable for pumps with various discharge outlet diameters. The inner shell material is divided into metal, rubber and other non-metallic materials. The inner shell of different materials is in the same outer shell. It should be interchangeable inside.

2. Vertical or horizontal single-shell pumps-suitable for low-head pumps with a discharge port diameter less than or equal to 20 cm.

3. The drive end of the pump shaft is viewed clockwise. For pumps adopting the auxiliary impeller seal type, the efficiency can be lowered by up to 5%.

Slurry pumps are mainly used in dredging, mining, metallurgy, municipal, electric power, coal, thermal power flue gas desulfurization, petroleum, chemical, and building materials industries to transport slurry containing abrasive solid particles. Such as beneficiation in a mine

The transportation of medium slurry, the hydraulic ash removal of thermal power plants, the coal slurry and heavy medium transportation of coal washing plants, and the transportation of some corrosive slurry containing crystals in the chemical industry.

In addition, in the field of seawater sand selection, the application fields of slurry pumps have also increased. But choose sand in the sea and dig sand in the river. Slurry pumps are called gravel pumps and dredging pumps. Although they are called differently, they can all be called slurry pumps in terms of structural characteristics and pump performance characteristics. Slurry pumps are widely used in different industries.

Horizontal Slurry Pumps

The reasons for the high current of the slurry pump are as follows:

Situation A: The relative density and viscosity of the process medium exceed the specifications.

Solution: Check the material components to make their viscosity and relative density consistent with the design values, and adjust them by the process operator.

Case B: Electrical failure.

Solution: Check the setting value of the circuit breaker heater, check the voltage, the three-phase current should be balanced, and the error is not more than 3%.

Case C: The outlet valve is fully opened when the pump is started, and the resistance in the outlet pipe is too small.

Solution: Close the outlet valve and slowly open the outlet valve after the pump is started.

Our company also has Horizontal Slurry Pumps on sale, welcome to contact us.